Artwork Services - Create a Gang Sheet
Artwork Services - Create a Gang Sheet
We can create your gang sheet for you. We will create it by placing multiple pre-made artwork images on your gang sheet.
- Gang Sheets will have 1/2" in between each artwork image so that you can cut your images easily.
- The gang sheet is emailed to you for final approval.
- You have the option to make One (1) free revision to the gang sheet.
- A final written approval is required, such as an email reply to proceed to print your gang sheet order.
Need help? Don't hesitate to call or text 949-229-1164, 7 days a week.
Couldn't load pickup availability
How to use with Heat Press
How to use with Heat Press
NOTE: Pre-Heat your Heat Press to reach 300-320 degrees.
1. Press your blank apparel on the side you will have your
design,
to give it a nice smooth surface.
2. Place your DTF Transfer in the exact location you want.
3. Cover your DTF Transfer with teflon on or parchment paper
of the
same size or larger. This will help avoid your transfer from
lifting.
4. Use your preheated Heat Press at 300-325 degrees to press
down
with heavy pressure for 20-25 seconds.
5. Once cooled down about 2-5 mins depending on room
temperature, peel off the backing of your DTF transfer.
6. Do a final press of 7-10 seconds using teflon or parchment paper
How to use with Home Iron
How to use with Home Iron
Using an iron:
1. Set your iron to the highest cotton setting without
steam.
2. Preheat your garment for a few seconds to remove any moisture and wrinkles.
3. Place the transfer face down on the garment, making sure it's centered and
aligned.
4. Apply firm and even pressure while moving the iron in a circular motion for
about 20-30 seconds.
5. Allow the transfer to cool down completely before peeling off the backing
paper.
6. Do a final press of 7-10 seconds using teflon or parchment paper
